Nowadays, a USB has become one of the main necessities because it is actually important for one to store some of is digital data. Now with this necessity, many people would actually like to have custom made usb drives to make their drives look beautiful. Now instead of going to a store to make one, it is actually possible to create one at home.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
A suggested thing to do would be to use a screwdriver instead of bare hands to split open the case. Now do take note that there are no screws on thumb drives but it will be help to snap open the covering. With a screwdriver, it will also be less likely that one will damage the internal part because he will not need to use too much force.
The next step in this process would be to find an outer covering for the thumb drive. Now this is the rather interesting part because this is where one can get creative. This outer covering can be made from practically any material ranging from plastic to metal or anything else.
Now some of the suggested things to use for this part would be some toys, lego blocks, or even clay if one would like. Of course there is no limit to the things that one can do with this. Now once he has already chosen what he wants to use for his outer covering, he now has to get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
A suggested thing to do would be to use a screwdriver instead of bare hands to split open the case. Now do take note that there are no screws on thumb drives but it will be help to snap open the covering. With a screwdriver, it will also be less likely that one will damage the internal part because he will not need to use too much force.
The next step in this process would be to find an outer covering for the thumb drive. Now this is the rather interesting part because this is where one can get creative. This outer covering can be made from practically any material ranging from plastic to metal or anything else.
Now some of the suggested things to use for this part would be some toys, lego blocks, or even clay if one would like. Of course there is no limit to the things that one can do with this. Now once he has already chosen what he wants to use for his outer covering, he now has to get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
About the Author:
Why search everywhere for custom made usb drives when you can easily find them on our website. To see what we have on offer, simply visit our homepage at http://bestcustomflashdrives.com today.
0 comments:
Post a Comment